{"title":"Wall chargers","description":"\u003cp\u003eFixed wall chargers for home and office parking. Sized to your car and your electricity connection, installed by certified electricians.\u003c\/p\u003e","products":[{"product_id":"polar-pro","title":"Polar Pro 7.5 kW Wall EV Charger","description":"\u003cp\u003ePolar Pro is a wall-mounted 7.5 kW charger for a permanent spot at home. It draws a full 32A on single-phase power, so it delivers the complete 7.5 kW without a three-phase connection.\u003c\/p\u003e\n\u003cp\u003eStart a session three ways: plug in and charge, tap the RFID card, or use the Zevpoint Home App over Wi-Fi or Bluetooth. An emergency stop switch sits on the unit, and the XL version has a 7 m cable for a charger mounted further from the parking spot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 7.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Single phase, 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Adjustable from 8A to 32A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 2 (IEC 62196-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m (7 m on the XL version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdates:\u003c\/strong\u003e Over-the-air (OTA) firmware updates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP66, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10+ built-in protections: emergency stop switch, overload, short-circuit, leakage, earthing, over-temperature, over-current, over-voltage and under-voltage protection, charge-status detection and warning indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Arctic White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 322 x 188 x 119 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 440 x 400 x 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e Polar Pro charger, mounting bracket, RFID card, mounting screws, installation manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated single-phase circuit, wired to the charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 6 sq mm 3-core copper cable (XLPE \/ HR FRLS) for a run of up to 29 m from the distribution board; 10 sq mm up to 49 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 40A double-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"5 Meter","offer_id":52790318367002,"sku":"ZPAC-11-7","price":29999.0,"currency_code":"INR","in_stock":true},{"title":"7 meter","offer_id":52790318399770,"sku":"ZPAC-11-8","price":32499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/31eY4nzyIeL.jpg?v=1737993781"},{"product_id":"polar-max","title":"Polar Max 22 kW Wall EV Charger","description":"\u003cp\u003ePolar Max is our fastest AC wall charger. It draws 32A per phase and delivers up to 22 kW on a three-phase supply, for cars that can charge at 22 kW.\u003c\/p\u003e\n\u003cp\u003eIt needs a three-phase supply. A car that charges on single phase, as most 7.2 kW cars do, charges from it at up to 7.5 kW. Start a session by plug, RFID card or the Zevpoint Home App, with an emergency stop switch on the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 22 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Three phase, 380-415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-phase cars:\u003c\/strong\u003e Up to 7.5 kW for a car that charges on single phase (most 7.2 kW cars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Adjustable from 8A to 32A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 2 (IEC 62196-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdates:\u003c\/strong\u003e Over-the-air (OTA) firmware updates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP66, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10+ built-in protections: emergency stop switch, overload, short-circuit, leakage, earthing, over-temperature, over-current, over-voltage and under-voltage protection, charge-status detection and warning indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 322 x 188 x 119 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 440 x 400 x 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e Polar Max charger, mounting bracket, RFID card, mounting screws, installation manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated three-phase circuit, wired to the charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 6 sq mm 5-core copper cable (XLPE \/ HR FRLS) for a run of up to 58 m from the distribution board; 10 sq mm up to 98 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 40A four-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, three-phase (3P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"Default Title","offer_id":50076125626650,"sku":"ZPAC-11-22","price":39999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/31eY4nzyIeL.jpg?v=1737993781"},{"product_id":"polar-max-11","title":"Polar X1 11 kW Wall EV Charger","description":"\u003cp\u003ePolar X1 is a wall-mounted 11 kW charger for homes and workplaces with a three-phase supply. It draws 16A per phase and delivers up to 11 kW to cars that can take it.\u003c\/p\u003e\n\u003cp\u003eIt needs a three-phase supply and a car that charges on three phase for 11 kW. On a single-phase supply, or with a car that charges on single phase (most 7.2 kW cars), it gives only about 3.6 kW; for those, Polar Pro is faster. Start a session by plug, RFID card or the Zevpoint Home App. The XL version has a 7 m cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 11 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Three phase, 380-415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-phase supply or car:\u003c\/strong\u003e About 3.6 kW. It draws 16A per phase, so on a single-phase supply, or with a car that charges on single phase (most 7.2 kW cars), a 7.5 kW charger is faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Adjustable from 8A to 16A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 2 (IEC 62196-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m (7 m on the XL version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Plug and charge, RFID card, Zevpoint Home App (Wi-Fi and Bluetooth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdates:\u003c\/strong\u003e Over-the-air (OTA) firmware updates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP66, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10+ built-in protections: emergency stop switch, overload, short-circuit, leakage, earthing, over-temperature, over-current, over-voltage and under-voltage protection, charge-status detection and warning indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 322 x 188 x 119 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 440 x 400 x 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e Polar X1 charger, mounting bracket, RFID card, mounting screws, installation manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated three-phase circuit, wired to the charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4 sq mm 5-core copper cable (XLPE \/ HR FRLS) for a run of up to 78 m from the distribution board; 6 sq mm up to 117 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 20A four-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, three-phase (3P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"5 meter","offer_id":52790261383450,"sku":"ZPAC-11-11","price":34999.0,"currency_code":"INR","in_stock":true},{"title":"7 meter","offer_id":52790261416218,"sku":"ZPAC-11-12","price":37499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/31eY4nzyIeL_c626017d-c195-45a3-bf09-735127eafff4.jpg?v=1737994122"},{"product_id":"titan","title":"Titan 19.2 kW Type 1 EV Charger","description":"\u003cp\u003eTitan is a 19.2 kW charger for imported cars with a Type 1 (SAE J1772) socket, such as the GMC Hummer EV, Cadillac Lyriq, Ford F-150 Lightning, Chevrolet Silverado EV and Lucid Air. It draws 80A on a single-phase supply.\u003c\/p\u003e\n\u003cp\u003eMost electric cars sold in India use Type 2 and cannot use Titan. It needs a dedicated 80A circuit with heavy cabling, so a site survey comes first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 19.2 kW (80A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Single phase, 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 80A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 1 (SAE J1772)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Plug and charge (no app)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP65, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Overload, short-circuit, ground fault, over-temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 388 x 202 x 109 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 480 x 350 x 280 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e Charger unit, user manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated 80A single-phase circuit, wired to the charger; a site survey comes first\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 25 sq mm 3-core copper cable (XLPE \/ HR FRLS) for a run of up to 49 m from the distribution board; 35 sq mm up to 67 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 100A double-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"Default Title","offer_id":51016959099162,"sku":"ZPAC-16","price":129000.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/1_fc07b6c2-2dc4-4890-b411-a5c006699d4c.png?v=1756881688"},{"product_id":"duos-22","title":"Duos 22 kW Wall EV Charger (OCPP)","description":"\u003cp\u003eDuos 22 is a wall-mounted 22 kW charger with one switch between home and commercial use. In home mode it charges your own car. In commercial mode it connects to a charging network over OCPP 1.6, so the same unit can meter and bill shared or paid charging.\u003c\/p\u003e\n\u003cp\u003eIt draws 32A per phase for up to 22 kW on a three-phase supply. A car that charges on single phase, as most 7.2 kW cars do, charges from it at up to 7.5 kW. An emergency stop switch sits on the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 22 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Three phase, 380-415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-phase cars:\u003c\/strong\u003e Up to 7.5 kW for a car that charges on single phase (most 7.2 kW cars)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Adjustable from 6A to 32A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 2 (IEC 62196-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m TPU cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Zevpoint Home App, RFID, OCPP 1.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP65, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Emergency stop switch, overload, short-circuit, leakage, earthing and over-temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 480 x 400 x 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 500 x 400 x 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e Charger unit, wall bracket, user manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated three-phase circuit, wired to the charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 6 sq mm 5-core copper cable (XLPE \/ HR FRLS) for a run of up to 58 m from the distribution board; 10 sq mm up to 98 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 40A four-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, three-phase (3P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"Default Title","offer_id":51091460227354,"sku":"ZPAC-15-22","price":44999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/2_5f276d2d-76fd-4752-be3c-2dd651dbfd1c.jpg?v=1758245600"},{"product_id":"duos","title":"Duos 7.5 kW Wall EV Charger (OCPP)","description":"\u003cp\u003eDuos is a wall-mounted 7.5 kW charger with one switch between home and commercial use. In home mode it charges your own car. In commercial mode it connects to a charging network over OCPP 1.6, so the same unit can meter and bill shared or paid charging.\u003c\/p\u003e\n\u003cp\u003eIt draws a full 32A on single-phase power, so it delivers the complete 7.5 kW without a three-phase connection. An emergency stop switch sits on the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 7.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Single phase, 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Adjustable from 6A to 32A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 2 (IEC 62196-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m TPU cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Zevpoint Home App, RFID, OCPP 1.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP65, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Emergency stop switch, overload, short-circuit, leakage, earthing and over-temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 480 x 400 x 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 500 x 400 x 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e Charger unit, wall bracket, user manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated single-phase circuit, wired to the charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 6 sq mm 3-core copper cable (XLPE \/ HR FRLS) for a run of up to 29 m from the distribution board; 10 sq mm up to 49 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 40A double-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"Default Title","offer_id":51091484836122,"sku":"ZPAC-15-7","price":34999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/2_5f276d2d-76fd-4752-be3c-2dd651dbfd1c.jpg?v=1758245600"},{"product_id":"duos-11","title":"Duos 11 kW Wall EV Charger (OCPP)","description":"\u003cp\u003eDuos 11 is a wall-mounted 11 kW charger with one switch between home and commercial use. In home mode it charges your own car. In commercial mode it connects to a charging network over OCPP 1.6, so the same unit can meter and bill shared or paid charging.\u003c\/p\u003e\n\u003cp\u003eIt needs a three-phase supply and a car that charges on three phase for 11 kW. On a single-phase supply, or with a car that charges on single phase (most 7.2 kW cars), it gives only about 3.6 kW; for those, Duos (7.5 kW) is faster. An emergency stop switch sits on the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Up to 11 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e Three phase, 380-415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-phase supply or car:\u003c\/strong\u003e About 3.6 kW. It draws 16A per phase, so on a single-phase supply, or with a car that charges on single phase (most 7.2 kW cars), a 7.5 kW charger is faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Adjustable from 6A to 16A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug:\u003c\/strong\u003e Wired to a dedicated circuit (wall-mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar connector:\u003c\/strong\u003e Type 2 (IEC 62196-2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 5 m TPU cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Zevpoint Home App, RFID, OCPP 1.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP65, dust and water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Emergency stop switch, overload, short-circuit, leakage, earthing and over-temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -35°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 480 x 400 x 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked size:\u003c\/strong\u003e 500 x 400 x 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on cable and enclosure, 2 years on all other components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower point:\u003c\/strong\u003e A dedicated three-phase circuit, wired to the charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4 sq mm 5-core copper cable (XLPE \/ HR FRLS) for a run of up to 78 m from the distribution board; 6 sq mm up to 117 m. Longer runs need a site survey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit breaker:\u003c\/strong\u003e 20A four-pole MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection:\u003c\/strong\u003e Type 2 SPD, three-phase (3P+N), 275 V, 20 kA nominal \/ 40 kA max, at the distribution board, required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing:\u003c\/strong\u003e Proper earthing is required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage stabiliser:\u003c\/strong\u003e If the supply voltage fluctuates often, use a suitable voltage stabiliser.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zevpoint","offers":[{"title":"Default Title","offer_id":52299927978266,"sku":"ZPAC-15-11","price":41999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/4583\/0938\/files\/2_5f276d2d-76fd-4752-be3c-2dd651dbfd1c.jpg?v=1758245600"}],"url":"https:\/\/www.zevpoint.com\/en-intl\/collections\/charging-stations.oembed","provider":"Zevpoint","version":"1.0","type":"link"}