Dash 2.0 7.5 kW portable EV charger

Dash 2.0 7.5 kW portable EV chargerDash 2.0 7.5 kW portable EV charger, photo 2Dash 2.0 7.5 kW portable EV charger, photo 3Dash 2.0 7.5 kW portable EV charger, photo 4Dash 2.0 7.5 kW portable EV charger, photo 5Dash 2.0 7.5 kW portable EV charger, photo 6Dash 2.0 7.5 kW portable EV charger, photo 7Dash 2.0 7.5 kW portable EV charger, photo 8Dash 2.0 7.5 kW portable EV charger, photo 9Dash 2.0 7.5 kW portable EV charger, photo 10

A 7.5 kW smart portable EV charger you can take wherever you charge. Touch and app control, IP66 rated, with 10+ safety protections built in.

Dash 2.0 is a 7.5 kW portable EV charger made by Zevpoint, with a Type 2 car connector and control from the Zevpoint Home app. Price Rs. 19,999.00, incl. GST. Ships within 24 hours.

  • LED display
  • Touch & app control
  • IP66
  • 10+ safety protections

Our flagship portable with a display: the same 7.5 kW as a wall charger, the app on your phone, and a bag and bracket in the box.

  • LED display: Each session, live on the unit.
  • 8 A or 32 A switch: Charges where the connected load is limited.
  • 32 A CEE plug: Draws the full 32 A for a full 7.5 kW.
  • Bracket and carry bag: Mount it at home, pack it for the road.
  • Plan: Schedule charging for the hours that suit you.
  • Track: See every session and the energy it used.
  • Adapt: Follow and control each session from your phone.
  • OTA updates: New firmware arrives over the air.
  • Built-in protections: Overload, short-circuit, leakage, earthing and over-temperature.
  • Auto cut-off: Stops on its own when charging is complete.
  • IP66 rated: Dust and water resistant, indoors or out.
  • ETL listed: Tested and listed to safety standards.

Which one is right for you?

  • Dash 3.6 (3.6 kW): Overnight charging from any 16 A home socket, plug and charge.
  • Dash Lite (7.5 kW): A full 7.5 kW, with every control in the Zevpoint Home app.
  • Dash 2.0 (7.5 kW): A full 7.5 kW with a display on the unit and the app.

Cars that charge at full speed on Dash 2.0

BYD Atto 3, BYD e6, BYD eMAX 7, BYD Seal, Eicher Pro 2055 EV, Hyundai Inster, Hyundai Kona Electric, Jupiter Electric JEM TEZ, Mahindra 3XO, Mahindra XUV400 EV, Mahindra Zeo, Maruti Suzuki e Vitara, Mercedes-Benz EQC, MG Comet EV FC, MG Hector Tomahawk EV, MG Windsor EV, MG ZS EV, Montra Electric Eviator, Switch Mobility IeV3, Switch Mobility IeV4, Tata Curvv EV, Tata Harrier EV, Tata Nexon EV LR, Tata Nexon EV MR, Tata Punch EV, Tata Safari EV, Tata Sierra EV, Tata Tiago EV (7.5 kW AC), Tata Xpres-T EV, Toyota Urban Cruiser Ebella, VinFast VF MPV 7, VinFast VF6, VinFast VF7.

Dash 2.0 specifications

  • Output: Up to 7.5 kW
  • Supply: Single phase, 220–240 V
  • Max output current: 32 A
  • Adjustable current: Switchable, 8 A or 32 A
  • Efficiency: Above 96%
  • Protection rating: IP66, dust and water resistant
  • Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
  • Certifications: ETL listed
  • Compliance: ISO 15118, IEC 61851
  • Plug: 32 A 3-pin CEE industrial plug (socket included)
  • Car connector: Type 2 (IEC 62196-2)
  • Cable length: 5 m
  • Control: Touch keys and Zevpoint Home App
  • Display: LED display with live session data
  • Status light: LED status light
  • Housing: High-grade ABS
  • Operating temperature: -30°C to +50°C
  • Weight: 3.5 kg
  • Packed size: 400 x 400 x 100 mm
  • In the box: Dash 2.0 charger, carry bag, wall bracket, 32 A CEE socket
  • Warranty: 5 years on cable and enclosure, 2 years on all other components

What your site needs for Dash 2.0

  • Power point: Dedicated 32 A single-phase circuit — Ending in the 32 A CEE socket that comes in the box.
  • Supply cable: 6 sq mm, 3-core copper — XLPE / HR FRLS, up to 29 m. Use 10 sq mm up to 49 m; longer runs need a site survey.
  • Circuit breaker: 40 A double-pole MCB — A breaker of its own, so the charger never shares a circuit.
  • Surge protection: Type 2 SPD, 1P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
  • Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
  • Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.

Will Dash 2.0 work with my car, and how fast will it charge?

It works with any electric car that has a Type 2 socket, which covers almost every electric car sold in India. Your car decides the top speed: a car that accepts 7 kW charges at 7 kW even on a bigger charger. The charging-speed tool on this page shows the time for your model.

Can my home’s electricity connection take it?

Check two things on your electricity bill: your sanctioned load, and whether the supply is single phase or three phase. This page lists what Dash 2.0 needs under “What your site needs”. If your load is short, your electricity company can increase it; the application is made in your name and we guide you through it.

What wiring, breaker and earthing does it need?

A dedicated circuit of its own, a breaker, a surge protection device and proper earthing. The cable size, breaker rating and longest cable run for Dash 2.0 are listed under “What your site needs” on this page. Longer runs need a site survey.

Is it safe outdoors and in the rain?

Yes. The charger is rated for protection against dust and water (the rating is in the specifications on this page), so it can be used outdoors.

What happens after a power cut?

When the charger is set to Quick charge or Plug & charge mode, charging resumes on its own once the power is back.

Who installs it, and what if I live in a society?

Dash 2.0 is portable: it plugs into the socket listed under “What your site needs” on this page, so there is nothing to mount. If that socket or its circuit has to be put in, we can do it for you; we install and service in every city across India.

If the cable passes through common areas, you will need permission (NOC) from your society before the visit.

What if it stops working?

Raise a service request or write to support@zevpoint.com. We first try to fix it remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.

Does the app need a particular Wi-Fi?

The Zevpoint Home app connects the charger over a 2.4 GHz Wi-Fi network. If your router is 5 GHz only, a 2.4 GHz mobile hotspot works as well.

Shipping, Cash on Delivery and GST invoice

Orders are processed and shipped within 24 hours, and tracking details are emailed to you.

Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.

GST invoice: email your GST details to support@zevpoint.com after ordering.

What does the warranty cover?

Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.

The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms

Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.

Can I return it?

Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return

Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy

Dash 2.0 is a portable 7.5 kW charger for single-phase homes. It draws a full 32A from a 32A CEE industrial socket, which is included, so it delivers the complete 7.5 kW without a three-phase connection.

A built-in display shows each session, and the Zevpoint Home App lets you follow and control it from your phone. A switch sets the current to 8A or 32A, so it can also charge where the connected load is limited. A carry bag and wall bracket are included.

Specifications

  • Output: Up to 7.5 kW
  • Supply: Single phase, 220-240V
  • Current: Switchable, 8A or 32A
  • Plug: 32A 3-pin CEE industrial plug (socket included)
  • Car connector: Type 2 (IEC 62196-2)
  • Cable length: 5 m
  • Control: Built-in display, plus Zevpoint Home App
  • Protection rating: IP66, dust and water resistant
  • Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
  • Operating temperature: -30°C to +50°C
  • Weight: 3.5 kg
  • Packed size: 400 x 400 x 100 mm
  • In the box: Dash 2.0 charger, carry bag, wall bracket, 32A CEE socket
  • Warranty: 5 years on cable and enclosure, 2 years on all other components

Installation

  • Power point: A dedicated 32A single-phase circuit ending in the included 32A CEE socket
  • Cable: 6 sq mm 3-core copper cable (XLPE / HR FRLS) for a run of up to 29 m from the distribution board; 10 sq mm up to 49 m. Longer runs need a site survey.
  • Circuit breaker: 40A double-pole MCB
  • Surge protection: Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
  • Earthing: Proper earthing is required
  • Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.