Dash 3.6 kW portable EV charger

A 3.6 kW portable EV charger for any regular home socket. Plug and play, with a large display, IP65 rated and 10+ safety protections.

Dash 3.6 is a 3.6 kW portable EV charger made by Zevpoint, with a Type 2 car connector. Price Rs. 14,499.00, incl. GST. Ships within 24 hours.

Plug & play
LED display
IP65
10+ safety protections

The simplest way to charge at home: an ordinary socket, a display on the unit, and nothing to set up.

Live display: Voltage, current, power and session time.
Touch keys: Set the charging current right on the unit.
16 A home plug: Charges from an ordinary 16 A socket.
LED status light: Shows charging status at a glance.
Plug in and charge: Connect the car and it starts charging.
Light, 2.8 kg: Easy to carry and easy to store.
Carry bag: Packs away when you travel.
5 m cable: Reaches most parking spots.
Built-in protections: Overload, short-circuit, leakage, earthing and over-temperature.
Auto cut-off: Stops on its own when charging is complete.
IP65 rated: Dust and water resistant, indoors or out.
ETL listed: Tested and listed to safety standards.

Which one is right for you?

Dash 3.6 (3.6 kW): Overnight charging from any 16 A home socket, plug and charge.
Dash Lite (7.5 kW): A full 7.5 kW, with every control in the Zevpoint Home app.
Dash 2.0 (7.5 kW): A full 7.5 kW with a display on the unit and the app.

Cars that charge at full speed on Dash 3.6

Citroen eC3, Citroen eC3X, Eicher Pro X, Euler Turbo EV 1000 Maxx, Mahindra e-Verito, Mahindra e2o, Mahindra e2o Plus, Mahindra REVAi, Mahindra XUV400 EV EC Pro, MG Comet EV, MG Hector Tomahawk PHEV, Tata Nexon EV Prime, Tata Tiago EV, Tata Tigor EV, Tata Tigor EV (pre-2023), Tata Xpres-T EV (pre-2023).

Dash 3.6 specifications

Output: Up to 3.6 kW
Supply: Single phase, 220–240 V
Max output current: 16 A
Adjustable current: Up to 16 A, with the touch keys on the unit
Efficiency: Above 96%
Protection rating: IP65, dust and water resistant
Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
Certifications: ETL listed
Compliance: ISO 15118, IEC 61851
Plug: 16 A 3-pin plug for an ordinary home socket
Car connector: Type 2 (IEC 62196-2)
Cable length: 5 m
Control: Touch keys on the unit
Display: LED display with live voltage, current, power and session time
Status light: LED status light
Housing: High-grade ABS
Operating temperature: -25°C to +50°C
Weight: 2.8 kg
Packed size: 400 x 400 x 100 mm
In the box: Dash 3.6 charger, carry bag, instruction manual
Warranty: 5 years on cable and enclosure, 2 years on all other components

What your site needs for Dash 3.6

Power point: Dedicated 16 A single-phase socket — With enough connected load for the charger.
Supply cable: 4 sq mm, 3-core copper — XLPE / HR FRLS, up to 39 m. Use 6 sq mm up to 58 m; longer runs need a site survey.
Circuit breaker: 20 A double-pole MCB — A breaker of its own, so the charger never shares a circuit.
Surge protection: Type 2 SPD, 1P+N — 275 V, 20 kA nominal / 40 kA max, fitted at the distribution board. Required.
Earthing: Proper earthing — Required for every install. Our electrician checks it before switching on.
Voltage stabiliser: Only if your supply fluctuates — If the voltage drops or spikes often, add a suitable stabiliser.

Will Dash 3.6 work with my car, and how fast will it charge?

It works with any electric car that has a Type 2 socket, which covers almost every electric car sold in India. Your car decides the top speed: a car that accepts 7 kW charges at 7 kW even on a bigger charger. The charging-speed tool on this page shows the time for your model.

Can my home’s electricity connection take it?

Check two things on your electricity bill: your sanctioned load, and whether the supply is single phase or three phase. This page lists what Dash 3.6 needs under “What your site needs”. If your load is short, your electricity company can increase it; the application is made in your name and we guide you through it.

What wiring, breaker and earthing does it need?

A dedicated circuit of its own, a breaker, a surge protection device and proper earthing. The cable size, breaker rating and longest cable run for Dash 3.6 are listed under “What your site needs” on this page. Longer runs need a site survey.

Is it safe outdoors and in the rain?

Yes. The charger is rated for protection against dust and water (the rating is in the specifications on this page), so it can be used outdoors.

What happens after a power cut?

When the charger is set to Quick charge or Plug & charge mode, charging resumes on its own once the power is back.

Who installs it, and what if I live in a society?

Dash 3.6 is portable: it plugs into the socket listed under “What your site needs” on this page, so there is nothing to mount. If that socket or its circuit has to be put in, we can do it for you; we install and service in every city across India.

If the cable passes through common areas, you will need permission (NOC) from your society before the visit.

What if it stops working?

Raise a service request or write to support@zevpoint.com. We first try to fix it remotely over a call or video, which is usually the quickest. If it needs repair, we arrange a free pickup from your address and deliver the repaired or replacement charger back. Technical support is free for the life of the charger.

Shipping, Cash on Delivery and GST invoice

Orders are processed and shipped within 24 hours, and tracking details are emailed to you.

Cash on Delivery is available across India. We take a small confirmation amount when you order and collect the balance at delivery. Call +91 9779750538 to arrange it.

GST invoice: email your GST details to support@zevpoint.com after ordering.

What does the warranty cover?

Cables: up to 5 years, covering defects but not physical damage to connectors. Housing and enclosure: 5 years. Other components: 2 years against manufacturing defects. Accessories: not covered.

The warranty doesn't cover improper use, power surges, supply-side electrical faults, burnouts or unauthorised modifications. Full warranty terms

Support: support@zevpoint.com · +91 9779750538 · Monday to Saturday, 10 AM to 6 PM.

Can I return it?

Within 7 days of receipt, unused and in the original packaging with all accessories and documentation. Proof of purchase is required. Start a return

Not returnable: Cash on Delivery orders, No Cost EMI orders, bulk orders of two or more, DC chargers and EV accessories. Full return policy

Dash 3.6 is the simplest way to charge at home. It runs from an ordinary 16A single-phase socket and delivers up to 3.6 kW, with no three-phase connection and no special supply to arrange. Plug it in, connect the car, and it charges.

A built-in display keeps you informed while it works, showing live voltage, current, power and session time on the unit itself, so you can see exactly what your car is drawing at a glance. For most daily driving, 3.6 kW overnight is all you need, and the charger packs into the included carry bag when you travel.

Specifications

Output: Up to 3.6 kW
Supply: Single phase, 220-240V
Current: 16A
Plug: 16A 3-pin plug for an ordinary home socket
Car connector: Type 2 (IEC 62196-2)
Cable length: 5 m
Control: Built-in display on the unit (no app)
Protection rating: IP65, dust and water resistant
Safety: Auto cut-off, overload, short-circuit, leakage, earthing and over-temperature protection
Weight: 2.8 kg
Packed size: 400 x 400 x 100 mm
In the box: Dash 3.6 charger, carry bag, instruction manual
Warranty: 5 years on cable and enclosure, 2 years on all other components

Installation

Power point: A dedicated 16A single-phase socket with adequate connected load
Cable: 4 sq mm 3-core copper cable (XLPE / HR FRLS) for a run of up to 39 m from the distribution board; 6 sq mm up to 58 m. Longer runs need a site survey.
Circuit breaker: 20A double-pole MCB
Surge protection: Type 2 SPD, single-phase (1P+N), 275 V, 20 kA nominal / 40 kA max, at the distribution board, required
Earthing: Proper earthing is required
Voltage stabiliser: If the supply voltage fluctuates often, use a suitable voltage stabiliser.